Datasheet

ManualsBrandsBELLWETHER ManualsTelecom & IT ConnectorsN/A Socket, vertical vertical Content: 1 pc(s)

PRODUCT SPECIFICATION

REVISI ECR/ECN DOCUMENT NUMBER SHEET

EK2015-0***

PS-80239-001

3 of 8

DATE: CREATED / REVISED CHECKED BY: APPROVED BY:

2015/08/03

Eric Bai Jerry Wang Larry Chen

1.SCOPE:

1.1 Content

This product specification defines the product performance and the test methods to

ascertain the performance of the

USB TYPE C Connector which is designed and

manufactured by Bellwether Electronic Corp.

1.2 Qualification

Tests and inspection shall be performed in accordance with the requirements, tests and

methods contained herein. All the inspections shall be conducted by using plan for the

product drawings and the inspection these products. A re-qualification test shall be

conducted immediately following all major process changes.

2. REFERENCED DOCUMENTS

EIA-364-1000.01

EIA-364

IEC-801-2

USB TYPE C Specification Rev:1.1

In case of any contradiction between this document and referenced documents, this document

will take precedence.

3. REQUIREMENT

3.1 Design

The product shall be as specified by

Bellwether’s customer drawing .

3.2 Material and Finish

See

Bellwether’s customer drawing .

3.3 Electrical & Mechanical Requirements

See

Bellwether’s Product Specification .

3.4 Application Performance:

3.4.1 Operating Environment: -55°C to +85°C, 85%RH, without loss of function.

3.4.2 Storage Environment: -40°C to +60°C, 85%RH, without loss of function at operating temperatures.

3.4.3 This connector is designed for reflow processing and must meet the specified requirements

accordingly.

3.5 High Frequency Performance:

Refer to the USB TYPE C Specification 1.1.

3.6 Health, Safety and Environment

Hazardous substances (Environment related to be controlled substances) contained in this product

should comply with the regulations specified by RoHS. The concentrations of Br&Cl can satisfy the

requirement of Halogen-Free in RoHS for Halogen-Free product.

3.7 Packaging and Transportation

3.7.1 Hazardous substances (Environment related to be controlled substances) contained in packaging

materials should comply with the regulations specified by RoHS.