Instructions

Bellwether Series 2
Our most consistent, durable and efficient roaster yet - with 50% more
roasting capacity per hour, enhanced cooling in under 4 minutes, a built-in
touchscreen and our most intuitive software to date.
Simple Installation
• No ventilation, gas lines, or construction needed
• No additional parts or accessories
• Roast the same day you install
Capacity
• Roasts 6 pounds green coffee at a time to yield
about 5 pounds of roasted coffee per batch
Size and Weight
• 30” deep
• 35” wide
• 76” tall
• 1350 lbs
Ambient Environmental Impact
• No impact to indoor heat or humidity
• Roaster surfaces are cool to the touch, safe for use
in public and high traffic areas
• The quietest commercial coffee roaster available
• Advanced filtration limits ambient odor, making
Bellwether suitable for indoor use. Some roasted
coffee aroma will be detectable when the roaster
is in operation.
Power Use
• 2-3 kWh per roast
• The Bellwether requires either a 240-volt, 50-amp,
single-phase service, or a 208-volt 50-amp three-
phase service
• The receptacle needs to be installed between 12”
and 24” up the wall
• The Bellwether Roaster Includes 6 foot (183 cm) long
cord with a 15-50 plug
Network and Connection
• Requires a direct ethernet cable connection to a
broadband internet router.
• 5mbps upload and 15mbps download speeds
required
Preheat and Cooling Cycles
• 25 minutes preheat from cold
• 3-10 minute charge temp return between roasts
• End of day cooling not required
USA/Canda:
240 VAC, 1-phase
60 Hz
50 amp circuit
36 amp max draw
Plug: 14-50P
USA/Canda:
240 VAC, 3-phase
60 Hz
50 amp circuit
36 amp max draw
Plug: 14-50 Delta
41
Electrical specifications single-phase Electrical specifications three-phase