Operation Manual
If Try this
The receiver is not
activated when there
is an incoming call or
message.
Note! Light lasting less
than 2 seconds will not
activate the system.
The receiver is activated
even if there is no in-
coming call or message.
• Makesurethatthesensorisplacedonthescreen
ofyourdevice.Alsomakesurethatthescreen
lightsup.
• Ensurethatallcablesareproperlyconnected.
• Checktheradiolinkbetweenthetransmitter
andreceiverbypressingtheTest-buttonon
thetransmitter.
• Makesurethatthesensorisstandingupright
onaatandnon-transparentsurface.
Mobile phone sensor
BE9251
Optical detection Activatedwhenthedisplaylightsup
Light sensitivity Visiblelight>3lux,forlongerthan2seconds
Placement Horizontallyonthedisplay
Ergonomic design Idealforpeoplewithimpairedvision/dexterity
Low center of gravity Resumesanuprightpositionifit’sknockedover
Connector 2.5mmteleplug
Weight 20g
Visit compatible IntegratesmobiledeviceswiththeVisitsystem
Technical information
Appendix
gb
European oce
Bellman&SymfonEuropeAB
SödraLångebergsgatan30
42132VästraFrölunda
Sweden
Phone+4631682820
Fax+4631682890
E-mailinfo@bellman.com
Asia Pacic oce
Bellman&SymfonAsiaLtd.
1115-16,MainTower,GDInt’lHotel
339HuanshiDongRd
Guangzhou,China,510095
Phone+862083182950
Fax+862083335528
E-mailinfo.cn@bellman.com
©2013,Bellman&SymfonAB,allrightsreserved.Bellman,Bellman&Symfonand
theBellman&SymfonlogoareregisteredtrademarksofBellman&SymfonAB.
bellman.com
BE9251_001MAN003
Troubleshooting
Appendix
gb
VisittransmitterandreceiversoldseparatelyPatentpending
bellman.com