User manual

64 65
DE
DK
EN
ES
FI
FR
IT
JP
NL
PL
SE
SI-CN
TR-CN
APP
Listening via the Trans-
mitter Unit
To listen on the microphone
in the Transmitter Unit press
the R button (7) on the
Receiver Unit. The external
sound LED (4) comes on
and the sound detected in
the Transmitter Unit is now
heard in the headphones.
Listening on the Receiver Unit’s microphone again
If you want to switch back to the internal microphone,
give a short press on the M button (5). The internal
microphone LED (2) comes on and the sound heard in
the headphones now comes from the Internal Micro-
phone (1) again.
Switching o
When you have nished, you
can switch o the Transmitter
and Receiver Units by press-
ing the On/O buttons i (6,
18) and holding them down
until the Battery Status LEDs
(3, 17) go out.
External sound source
If the audio cable (which has a small 2.5 mm jack plug on one end), or if the Ex-
ternal Microphone is connected to the Transmitter Unit’s external sound source
input (20), the Transmitter Unit’s internal microphone will be disconnected and
the external sound source will be automatically selected. The Battery Status
LED blinks orange several times to conrm that an external sound source has
been connected. The External Sound LED (4) will light up green and orange
at the same time to indicate that the sound is coming from an external sound
source.
If the audio cable is disconnected, the sound will be reconnected to the Trans-
mitter Unit’s microphone again.
With the audio cable connected between a Transmitter Unit and a TV, hi-
equipment, MP3 player or similar sound source you can listen to absolutely rst
class stereo sound without being limited by cables.
The input sensitivity is automatically adjusted to suit dierent sound sources.
OFF
1 s
OFF
1 s