User manual

62 63
DE
DK
EN
ES
FI
FR
IT
JP
NL
PL
SE
SI-CN
TR-CN
APP
Using the Receiver Unit
Connect BE9122 Bellman Stereo Headphones, BE9128 Bellman Neck Loop,
BE9125 Bellman Stetoclip, BE9124 Bellman In-ear Phones or another listening
product recommended by Bellman & Symfon to the headphone output (13) on
the right-hand side as illustrated in the fold-out section of the manual.
Switching on the Receiver Unit
Press the On/O button i (6). The Battery Status LED
(3) starts to shine with a green light to indicate that the
unit is on.
The Receiver Unit always starts with the internal
microphone selected as a sound source. In addition,
the volume control is always set to low volume to avoid
unpleasant sound levels.
Selecting the sound volume
Use the volume control’s + button (9) to increase and
the - button (10) to decrease the sound level. The
Volume and Tone LED Indicator (8) shows the sound
level. The more LEDs that are lit the higher the volume.
The LED indicator goes out 5 seconds after the sound
volume has been set.
Selecting the tone
Use the tone control’s < button (11) to reduce and the
> button (12) to increase the treble in the tone. The
Volume and Tone LED Indicator (8) shows the selected
setting. The LED indicator goes out 5 seconds after the
sound quality has been set.
The Receiver Unit can be used as a small and adaptable self-contained call
amplier, but together with the Transmitter Unit it opens up a whole new
range of possibilities. You can achieve the greatest exibility when using the
Receiver Unit together with the Transmitter Unit.
Using the Transmitter Unit
Switching on the Transmitter Unit
Press the On/O button i (18). The Battery Status LED
(17) starts to shine with a green light to indicate that
the unit is on.