User's Manual

Quick start guide
1 Mount the baseplate
Fix the baseplate to the ceiling using a screwdriver. The smoke alarm should be mounted
at least 305 mm (12") from walls and obstructions, ideally centrally in the room/area.
3 Attach the unit
Place the smoke alarm unit on top of the baseplate and twist it clockwise to attach it.
4 Test the alarm
A Press and hold the smoke alarm test button until the alarm sounds.
B The Visit receiver lights up a re symbol in red and alerts with sound, ashes or vibra-
tions (depending on the Visit receiver).
Please note: The smoke alarm will stop sounding shortly after the button is released
and the Visit receiver will time out within ~40 s.
2 Connect the battery
Connect the battery to the battery snaps to power the smoke alarm unit.
Only use a Duracell MN1604 alkaline 9V battery.
Minimum
305mm (12")
Battery
connectors
Base
9 Volt
battery
5 6
Minimum
305mm (12")