User's Manual

15
Removing one smoke alarm transmitter from the system
Removing all smoke alarm transmitters from the system
5 s
5 s
Menu
button
Menu
button
Menu
button
Menu
button
Smoke alarm
supervision
LED
Smoke alarm
supervision
LED

Press and hold the Smoke alarm transmitter
Menu button (13) for more than 5 seconds.

Release the button.

The ash receiver will indicate the
successful removal of the smoke
alarm transmitter by swithing between
the LED lights four times.

Press and hold the Smoke alarm transmitter
Menu button (13) for more than 5 seconds.

Release the button.

The ash receiver will indicate the successful
removal of the smoke alarm transmitter
by swithing between the
LED
lights four times.

Press the Menu button (13) on the backside
of the unit.

The Smoke alarm supervision LED (15) will
light up green to indicate you are entering
the menu system.

Press the Menu button (13) until the LED
(3) switches to the corresponding smoke
alarm transmitter as per page 13.

Press the Smoke alarm transmitter Menu
button (13) on the backside of the unit.

The Smoke alarm supervision LED (15) will
light up green to indicate you are entering
the menu system.
EN
BE1444_005MAN002-433-Visit-Flashreceiver.indb 16 2017-09-06 09:33:55