User's Manual

12
1 2
5 s
3 s
1 2
5 s
3 s
Smoke alarm supervision (BE1444 only)
BE1444 has an unique feature when working with smoke alarm transmitter BE1281, which
is called smoke alarm supervision function.
To activate the smoke alarm supervision function on the flash receiver, you need to
manually pair the smoke alarm transmitter BE1281 by allowing the ash receiver to store
the hardware ID of the smoke alarm.

Press and hold the mute/test button on
the top of the receiver until the green
and yellow Visit LEDs blink alternately.
Release the button.

Press and hold the test button on the
smoke alarm for more than 3 seconds
until it alarms.

Release the button.

The ash receiver will indicate that pair-
ing was successful by switching between
the LED
lights four times.
BE1444_005MAN002-433-Visit-Flashreceiver.indb 14 2017-09-06 09:33:54