User's Manual

ON
OFF
Changing the radio key
If you start hearing monitor alarms for no obvious reason, there is prob-
ably a nearby Visit system that triggers your system. In order to avoid
radio interference you need to change the radio key on all units.
Please note: All units are set to the same radio key from factory and all
switches are positioned down=o per default.
1 Open the Visit monitor front cover and move any radio key switch(es) to
the up=on position to change the radio key. Repeat the procedure for
all monitors. Note that all units must be set to the same radio key.
2 Press and hold the button on the Smart hub until the bottom LED
starts to blink in green/amber.
3 Press the test buttons on any of the Visit monitors. The Smart hub LED
light will stay lit for 5 seconds to show that the new radio key is being
transferred. When the transmission is completed the LED will turn o.
1
2 3
Smart hubMonitor Monitor
35 36