User's Manual

Tips & tricks
If Try this
I hear no alarm in my
hearing aids when I
make some noise.
 Move closer to the Smart hub to make sure you are
within its operating range.
 Press both test buttons on the monitor simultaneously.
If you don’t hear an alarm signal in your ears, check
the monitor’s batteries and make sure it’s properly
installed, see Setting up the Room monitor on p22.
 Press both test buttons once again. If you still don’t hear
an alarm in your ears, follow the Checklist on p10.
The alarm is triggered
too easily/not at all
 Adjust the sensitivity by pressing the top left button,
see the inside of the monitor’s cover for details.
The alarm is triggered
too fast/slow
 Adjust the delay by pressing the lower left button,
see the inside of the monitor’s cover for details.
2
1
23 24
Testing the connection
1 Ask someone to stand by the monitor and make some noise.
2 Your hearing aids will temporarily mute the sound, and you will hear
an alarm signal directly in your ears.
If you don’t hear it, see Tips & tricks on page 24.