User manual

8
3. Use 16pcs Screw (M4x14mm) to fix installation post onto range hood main body, and 8pcs Screw
(M4x14mm) and 8pcs Nut (M4) to fix upper and lower installation post.
4. Carefully slide down inner and outer decorative chimney from top of installation posts.
5. Raising whole unit up and secure upper installation post onto installation board by 8pcs Screw (M4x14mm)
and 8pcs Nut (M4), plug in power cord.
6. Carefully slide decorative chimney up and secure it onto installation board by 4pcs Screw (M4x14mm)