User manual
7
Hints for exhaust duct installation
The following rules must be strictly followed to obtain optimal air extraction
• Keep exhaust duct short and straight
•
Do not reduce the size or restrict exhaust duct
•
When using flexible duct always install the duct pulled taut to minimize pressure loss
•
Failure to observe these basic instructions will reduce the performance and increase noise levels of the
range hood
•
Ensure the exhaust ducting selected for installation complies with relevant standards and is fire retardant
1. Determine position of ceiling where the chimney will go down from. According to installation board, use 6pcs
Screw (ST4.5x40mm) to fix installation board onto ceiling security.
2.
Fit the flexible exhaust duct onto outlet. ( Air Extraction mode only )
Note : For the Air Circulation Mode option , skip step 2.