Technical data

INSTALLATION
13.302
Connect to the electricity supply
For hobs that are supplied/manufactured
with a 13Amp supply cord and plug only.
Warning:Ensurethatthepowerratingof
the appliance is compatible with a 13Amp
supply before connecting to the electricity
supply, i.e. 2.8kW.
Warning: This appliance must be
earthed.
Theexiblemainsleadissuppliedcon-
nected to a BS 1363 fused plug, the plug
isttedwiththecorrectfuse.
Replace only with a fuse of the same rat-
ing and type.
The wires in the mains lead are coloured
inaccordancewiththefollowingcode:
Green and yellow = Earth,
Blue = Neutral,
Brown = Live.
As the colours of the wires in the mains
lead for the appliance may not correspond
with the coloured markings identifying the
terminalsinyourplug,proceedasfollows:
1. The wire which is coloured green and
yellow must be connected to the terminal
marked E (Earth) or coloured Green.
2. The wire which is coloured blue must
be connected to the terminal marked N
(Neutral), or coloured Black.
3. The wire which is coloured brown must
be connected to the terminal marked L
(Live), or coloured Red.
The plug and socket must be accessible
after installation. Should the mains lead
of the appliance ever require replacing,
we recommend that this is carried out by
aqualiedelectricianwhowillreplaceit
with a lead of the same size and tempera-
ture rating.
Important:-ensurethatyourouteall
mainsandelectricalcablesandexible
tubing well clear of any adjacent heat
source.
Under no circumstances should the mains
electric cable be allowed to come into con-
tactwithhotovenuesorsimilarsurfaces
and keep well clear of any moving parts
that may be in the vicinity of the instal-
lation, such as cooling fans on adjacent
appliances.
Troubleshooting
Before you call Customer Care, please
checkthefollowingpoints:
Burner fails to ignite:
•Checktheelectricitysupplyison.
•Checkthefuse.
There is a spark to the burner but it
fails to ignite:
•Checkthattheameholesintheame
spreader are clear of water or deposits.
•Checkthatthegassupplyisturnedon.
Smell of gas:
•Checkthatnoneofthecontrolshave
inadvertently been turned on. If all the
controls are in the off position, turn off
the gas supply & call Customer Care.
The burner ame appears uneven:
•Checktheburneristtedcorrectly.
•Checktheameholesintheame
spreader are clear of water or deposits.