Technical data

USING THE CLOCK/PROGRAMMER - ANALOGUE (IF FITTED)
11.601
ANALOGUE TIMER
The analogue clock / programmer is a
time display which is also able to control
the oven.
Pushing knob ‘Y’ the number of times
shown you can adjust:
1. Cooking start time
2. Cooking end time
3. Timer alarm
4. Clock
FIRST OPERATION OR AFTER RE-
CONNECTION OF MAINS ELECTRIC-
ITY SUPPLY
The CLOCK icon (4) will be ashing to
indicate an interuption to the electricity
supply.
Press button ‘Y’ the light will stop ashing.
SETTING THE TIME OF DAY
Press button ‘Y’ 4 times.
The CLOCK icon (4) will illuminate.
Rotate button ‘Y’ clockwise to advance
time or anticlockwise to decrease time.
The time set must be greater than 2 min-
utes in the future.
After 10 seconds of no use the light will
go off. The time of day is now set.
MANUAL COOKING (see using the oven
section)
END COOKING TIME
This function allows cooking to start
immediately and end at a set time. To
program end cooking time:
Press button ‘Y’ 2 times.
The STOP icon (2) will ash.
Rotate button ‘Y’ clockwise to advance
time or anticlockwise to decrease time.
The time set must be greater than 2 min-
utes in the future.
Press button ‘Y’ 1 time.
The STOP icon (2) will illuminate solid.
Cooking will now start and the alarm is
activated. When time of day = STOP time
the cooking will be stopped and the alarm
will sound for 1 minute.
The STOP icon (2) will ash until the but-
ton ‘Y’ is pressed.
To view a set program press button ‘Y’ 1
time.
NOTE: The clock face is shown for illustration only. It may differ in style on your appliance.