Service manual

10
REPLACEMENT OF COMPONANTS
A) ELECTRODES
FOLLOW STEP 3 AND
REMOVE THE HOB TOP
REMOVE ELCTRODE CLIP BY
SQEEZING TOGETHER AND PULLING
T O REMOVE
REMOVE ELECTRODE FROM
BURNER BOWL AND IGNITION LEAD
FROM IGNITIION GENERATOR
ON REPLACING ALWAYS ENSURE
THAT THE RUBBER WASHER IS
REFITTED
B) HOB THERMOCOUPLES
FOLLOW STEP 3 AND REMOVE THE
HOB TOP
REMOVE UPPER NUT USING A 7mm
SPANNER
REMOVE THE THERMOCOUPLE
FROM THE BURNERBOWL
ON REPLACING ALWAYS ENSURE
THAT THE RUBBER WASHER IS
REPLACED TO REDUCE DISTUR-
BANCE TO THE FLAME DUE TO THE
COOLING FAN