Technical data

Installation Instructions
Recessed Method (selected models)
Recess the work top to the appropriate depth and
shape to fit the hob.
Apply the self adhesive seal to the underside of the
hob glass. For best results, the seal should be
adhered along each joint in turn, as close to the edge
as possible, and trimmed at each corner, taking care
to ensure a neat join.
Insert the hob into the recess, ensuring that the foam
seal is sitting correctly. Locate and attach the securing
clamps to the front and rear underside of the hob,
using the screws provided. Tighten the screws so that
the hob is pulled down firmly against the worktop,
thus ensuring a good seal.
You may want to fill any gap between the hob top
glass and the work top surface with silicone sealant.
DO NOT fit silicone sealant under the glass hob
instead of foam seal.
I
mportant: Clamps may
be reversed to fit either
30mm or 40mm deep
w
ork top.
i
30
Metal hob
frame
Glass hob
surface
Foam
seal
Worktop
surface
Silicone sealant - to be used
t
o fill gap between worktop & glass