Technical data

Timer auto switch off
The timer can be set to automatically turn off a cooking zone.
All four cook zones can be simultaneously timed to turn off automatically.
Cook zones can be set for a maximum time of 99 minutes.
Warning!
Never leave the hob unattended when in use, even when you have set the timer to
turn off the cook zone
To Operate.
1) Select the cook zone to be timed, ensure power level is already set before select-
ing timer.
2) Select the timer, the flashing indicator on the timer display means the timer is
ready to be set for that particular zone.
3) Set the right hand digit up to 9 minutes (Single Minutes Units) and wait a couple
of seconds.
4) The display will now indicate for you to set the left hand digit, up to 90 minutes
(10 Minute Units), and wait a couple of seconds. Skip this step if you want set the
timer for less than 10mins, leave the timer for a few seconds at it will automatically
set and start counting down.
5) The timer indicator in the timer display stops flashing and remain lit, the timer is
now set and begins counting down.
When the time is up
1) The corresponding indicator in the timer display will flash, the timer will beep, and
the cook zone will automatically turn off, (The cook zone will display H if the surface
is hot).
2) Touch any control to stop the beeping.
Additional timer information
To modify or cancel a timer setting follow steps 1) to 5) above.
To set the timer for additional zones follow steps 1) to 5) above.
If multiple zones have been set for timed operation , the timer display will always
display the time for the cook zone with the shortest time remaining.
To check the timer setting for a different cook zone, simply select the required cook
zone, the remaining time will briefly appear in the timer display.
16