Technical data

INSTALLATION INSTRUCTIONS - DUAL FUEL
CONNECT TO THE ELECTRICITY SUP-
PLY
Warning: This appliance must be earthed.
The appliance must be installed by a
competent electrician using a double
pole control unit of 32 ampere minimum
capacity with 3mm minimum contact
separation at all poles.
We recommend that the appliance is con-
nectedbyaqualiedelectricianwhoisa
member of the N.I.C.E.I.C. and who will
comply with the I.E.E. and local regula-
tion.
1. Access to the mains terminal
is gained by opening the terminal block
cover at the rear of the appliance (use a
smallat-bladedscrewdriver).
2. Connection should be made with
6.0mm2exibletwinandearthcable.
3. First strip the wires, then push
the cable through the cable clamp in the
terminal block cover.
4. Connect the cable to the ter-
minal block and tighten the cable clamp
screw (see diagram).
5. Close the terminal box, ensuring
that the cover is engaged on the locking
tabs.
Yourappliancewillbettedwithoneofthe
two terminal blocks below, Block A, Block B