Technical data

INSTALLATION INSTRUCTIONS - DUAL FUEL
Before you start: Please read the in-
structions. Planning your installation
will save you time and effort.
Prior to installation, ensure that the local
distribution conditions (nature of the gas
and gas pressure) and the adjustment of
the appliance are compatible. The adjust-
ment conditions are stated on the data
badge.
This appliance is not connected to a com-
bustion evacuation device. It shall be in-
stalled and connected in accordance with
current installation regulation. Particular
attention shall be given to the relevant
requirementsregardingventilation.
Ventilation Requirements
VentilationmustbeasspeciedbyAS
5601 Installation code. The room con-
taining the appliance should have an air
supply.
An appliance should be installed in a
location for complete combustion of gas,
properueingandtomaintainambient
temperature of the immediate surround-
ing at safe limits, under normal condi-
tions.
Failure to install appliances cor-
rectly is dangerous and could lead to
prosecution.
Windows and permanent vents should
therefore not be blocked or removed
withoutrstconsultingaGASSAFEgas
installer.
Failure to install appliances correctly is
dangerous and could lead to prosecution.
Whilst every care is taken to eliminate
burrs and raw edges from this product,
please take care when handling - we
recommend the use of protective gloves
during installation.
Moving the cooker
Please note that the weight of this appli-
ance is approximately 60kg (unpacked).
Take care if the appliance needs to be
lifted during installation - always use an
appropriate method of lifting.
Do not attempt to move the cooker by
pulling on the doors or handles. Open the
door and grasp the frame of the cooker,
taking care that the door does not shut
onyourngers.
Take care to avoid damage to soft or
unevenoorcoveringswhenmovingthe
appliance.Somecushionedvinyloor
coverings may not be designed to with-
stand sliding appliances without marking
or damage.
Important: Ensure that you route all
mains cables well clear of any adjacent
heat source.
Gas Safety (Installation & Use)
Regulations
This appliance must by an authorised
person in accordance with the Austra-
lian Gas Installation Standard AS5601
the manufacturers installation instruc-
tions,localgasttingregulations,and
any other relevant statutory regula-
tions.
Particular attention should be given
torelevantrequirementsregarding
ventilation.