Technical data

IGNITION PROCEDURE
Prior to ignition:
Hotplate burner(s), position correctly
sized,atbottomedpan(s)directlyonto
the pan support above the selected
burner(s).
Wok burner (if tted)
a)Positionaatbottomedwokoracor-
rectlysized,atbottomedpandirectly
onto the pan support above the wok
burner.
b) Position the provided wok stand direct-
ly onto the pan support above the wok
burner, then position a round bottomed
wok directly onto the stand.
Correct procedure for ignition of all
gas burners on this appliance.
Manual ignition (if applicable)
• Push in and keep depressed the igni-
tion button . Sparking to all gas
burners will commence.
• Push in and turn the selected gas
burnercontrolknobtothefullame
symbol . Keep the control knob
depressed.
• As soon as the selected burner ig-
nites release the ignition button.
• Continue to hold the control knob in
for up to 15 seconds then release.
• If the burner fails to ignite within this
time, release the control knob and
wait 1 minute before attempting to
re-ignite.
Automatic ignition (if applicable)
• Push in and turn the selected gas
burnercontrolknobtothefullame
symbol . Keep the control knob
depressed. Sparking to the selected
burner will commence automatically.
Sparking will cease automatically
oncetheameisestablished.
• Continue to hold the control knob in
for up to 15 seconds then release.
• If the burner fails to ignite within this
time, release the control knob and
wait 1 minute before attempting to
re-ignite.
In the event of a power failure, or the
ignition not working, then a lighted match
or taper can be used to ignite the burner.