Service manual

Through your programmer you will be able to set the time
of day, set the minute minder, and use the semi and fully
automatic cooking functions. The programmer is vital to
the working of your appliance, and reading this section will
make sure that you get the most out of your ovens.
The programmer buttons (touch control timer)
There are three icons on this type of timer. The table below
shows you what their symbols look like, depending on the
model type, and what they do.
Setting the time of day (touch control timer)
 Press the centre icon for a few seconds, and release.
 The ‘’ in between the numbers on the LED Display will
begin to flash.
 While the ‘’ is flashing it is possible to adjust the time
using the Plus and Minus icons. Please note: the hours
and minutes adjust quickly.
 Once the time has been set, allow a few seconds before
using any of the other timer functions. This ensures that
the time will remain correct.
Setting an alarm tone (touch control timer)
 Press and release the Plus and Minus icons, then press
the centre icon. Use the minus icon to listen to the
tones.
 Once the minus icon is released, the tone is selected.
Symbol Symbol What is it?
-
Down / Minus
Used to decrease cook / end time, remove
minutes from the minute minder and adjust
the time of day.
Also for listening to and setting the alarm
tone. There are 3 tones to choose from.
+
Up / Plus
Used to increase cook / end time, add minutes
to the minute minder and adjust the time of
day.
Function icon
Used to select the functions available on this
timer.
Press once for: Minute Minder and to set
the time of day.
Press twice for: Cook time
Press three times for: End time.
How to use these functions is explained later
on in this section.
Using The Programmer/Clock
A





This is a 24 hour clock.
Before you do anything
with your appliance -
you must set the cor-
rect time of day.
i
What your timer symbols
mean.
9