Operation Manual

Using The Programmer/Clock
Setting an alarm tone (Push button timer)
 Press and hold the minus button.
 Once the minus button is released, the tone is selected.
 You can change tone by repeatedly pressing the minus
button (3 tones)
Setting the minute minder (push button timer)
 To set the Minute Minder, press the centre button once.
The bell symbol will appear and start flashing.
The flashing will last for approx. 5 seconds so the
time must be set within this time frame.
 Use the Plus and Minus button to set the length of time
required. Once this has been done, the Minute Minder
is set.
 When the desired length of time has counted down the
alarm will sound. To cancel the tone, press any of the
buttons.
 To cancel the Minute Minder at any time, press the Plus
and Minus buttons together.
Semi Automatic Cooking (Push button timer)
Duration method (switch off after set time period)
 Press the Function (centre) button twice (This will skip
past the Minute Minder function).
 The display will flash the word ‘dur’, and the ‘A’ will flash
on the left hand side of the display.
 Use the Plus and Minus buttons to set the length of time
you want to cook for. The flashing will last for
approx. 5 seconds, so the setting must be done
within this time frame or the time of day will
show again.
 Once the duration has been set, the oven will automati-
cally switch off.When the set time has elapsed the alarm
will sound. To switch off the alarm, press any button.
 To view any remaining time press the function (centre)
button twice.
 To cancel the semi automatic programme at any time,
press the plus and minus buttons together.
The End Time method (Switch off at a set end time)
 Press the Function button three times (This will skip past
the Minute Minder and the Duration function)
 The display will flash the word ‘End’ and the ‘A’ will flash
on the left hand side of the display.