Operation Manual

Using Your Main Oven

The main oven may be controlled by the programmer (see

The Programmer/Clock for details).

The programmer, if fitted, must be set to manual before it

can be used, or programmed.

Switching on the fanned / conventional oven

 Use the main oven control to turn your oven on, and

select your temperature.

 Your appliance may be fitted with a thermostat indicator

light. If it is, then this will come on to show that the oven

is heating, and once the temperature is achieved, it will

go out.

 To switch off the main oven, simply turn the control knob

back to the ‘ ‘ position.

 The cooling fan will come on during use, and may con-

tinue to run for some time afterwards.

Switching on the multifunction oven (if applicable)

 Use the function control knob to select the function you

wish to use - see the functions table for details.

Note: You can change function during cooking if you

wish, as long as the oven is in manual mode.

 Turn the temperature control knob to the temperature

you wish to use.

 Your appliance may be fitted with a thermostat indicator

light. If it is, then this will come on to show that the oven

is heating, and once the temperature is achieved, it will

go out.

 To switch off the main oven, simply turn the control knob

back to the ‘ ‘ position.

 The cooling fan will come on during use, and may contin-

ue to run for some time afterwards.

Important: Never

place food, or dishes on

the base of the main

oven, the element is

here and it will cause

over heating.