Operation Manual

Setting the Programmer
Fully Automatic Cooking (Touch Control timer)
This function allows the cooker to switch on and off
automatically
It requires both the duration and the end time to be
entered. The timer will work out the start time and begin
cooking.
 Touch and hold the Function (centre) icon. The bell will
flash and beep. Touch the function (centre) icon again.
(This will skip past the Minute Minder).
 The display will flash the word ‘dur’, and the ‘A’ will flash
on the left hand side of the display.
 Use the Plus and Minus icons to set the length of time
you want to cook for. The flashing will last for
approx. 5 seconds so any setting must be set
within this time frame or the time of day will
show again.
 Touch the Function icon again (skips past the Minute
Minder and the Duration functions)
 The display will flash ‘End’ and the ‘A’ will flash on the
left hand side of the display.
 Use the Plus and Minus icons to select the time the oven
is required to turn off.
 Set the temperature of the oven and place the food
inside. The timer will calculate the start time.
 When this is done the oven will turn itself off at the time
you have selected. To switch off the alarm, press any
icon.
 To cancel the automatic programme at any time, press
the plus and minus buttons together.
The automatic cooking
symbol will appear to
show that the oven is
no longer in manual
mode but in automatic
mode.
i
Important: Once the
oven has switched itself
off please make sure
you turn to oven con-
trols to the ‘off’ position
and set the oven to
manual by pressing the
Cook Time and Ready
Time buttons / icons
together.
i
Important: Remove
food as soon as it is
cooked.
i