Technical data

Cautio n: Any cleaning agent
used incorrectly may damage
the appliance.
Always let the appliance cool
before cleaning.
Some cooking operations generate a
considerable amount of grease. This,
combined with spillage, can become a
hazard if allowed to accumulate on
the appliance through lack of cleaning.
In extreme cases this may amount to
misuse of the appliance and could
invalidate your guarantee.
It is recommended that the appliance
is cleaned after open roasting.
Do not use caustic , corrosive or
abrasive cleaning products, products
containing bleach, coarse wire wool
or any hard implements, as they will
damage the surfaces.
All parts of the appliance can be safely
cleaned with a cloth wrung out in hot
soapy water.
Painted, plastic and metal finish
parts (if fitted)
DOOR H ANDLES, METAL FASCIA PANEL,
CONTROL KNOBS
Only use a clean cloth wrung out in
hot soapy water.
Enamel surfaces
O
VEN CAVITY
, G
RILL PAN
& R
OASTING TIN
If you do a lot of open roasting, or
roast at temperatures above 200˚C,
we recommend regular cleaning. Use
of a trivet in a roasting tin when
roasting will help reduce fat splashing.
Caution: Most types of cleaning
agent will damage these surfaces.
Only use a few drops of washing up
liquid in hot water. Wipe the surfaces
with a clean cloth wrung out in hot soapy
water - if larger splashes of fat do not
readily disappear, scrub the area with
a nylon brush or nylon pan scourer
and hot soapy water. Rinse well and
heat the oven to dry the surfaces.
19
Cleaning