Specifications

8
Clock/Programmer (BI 602F)
Note: The image below is a generic timer image, your clock / programmer may not have all these
functions.
Minute minder
Minus button Plus buttonFunction button
Auto cooking
Automatic mode
A
Display hours:minutes
7-segment display
When the oven is rst connected to the electrical supply, wait for the display to automatically show
“12.30”, a beep sounds once and the “12” and ”.” ashes. Ensure the correct time of the day is set
before using the oven.
Note: This is a 24 hour clock, for example 2PM shown as “14.00”.
To set the correct Time Of Day
1. Press Plus or Minus buttons to adjust the hour setting.
2. Press to conrm the hour setting.
3. Press Plus or Minus buttons to adjust the minute setting.
4. Press to conrm the minute setting and the timer will be in standby mode.
Note: If the display does not ash, adjust the Time Of Day by pressing the Plus and Minus buttons at
the same time for more than 3 seconds.
Manual operation of the oven
If the timer is in standby mode press for more than 3 seconds, the timer will enter manual mode and
the symbol will light up continuously.
1. Set the desired cooking function and the temperature degree.
2. Set the time function, then the oven will be on.
If you set “Dur” or “End” after cooking, the oven will automatically turn o󰀨.
If you set manual or minute minder after cooking, set the cooking function and oven temperature knob
o󰀨 to “0”. Press and the Plus buttons for more than 3 seconds to return to standby mode.