Specifications

15
BULB REPLACEMENT
Risk of electric shock!
Glass cover
You must replace a damaged glass cover. Suitable glass covers may be obtained from the after-sales
service.
For replacement, proceed as follows:
1. Disconnect power from the mains outlet or switch o󰀨 the circuit breaker
of the unit’s mains outlet.
2. Unscrew the glass lamp cover by turning it counter-clockwise (note, it
may be sti󰀨) and replace the bulb with a new one of the same type.
3. Screw the glass lamp cover back in place.
Note: Only use 25-40W/220V-240V, T300°C halogen lamps