Specifications

10
Semi-automaticnishingtime
This function is used to cook according to the desired nishing time. The food to be cooked is put into
the oven. The oven is adjusted to the desired cooking function and temperature degree.
1. Press button until you see “End“ on the timer screen. (Before setting nished time).
2. Use the Plus or Minus buttons to adjust nishing time. (Refer to the instructions for setting the
correct time of day.)
3. Press the button to conrm, the Time Of Day will appear on the screen and the symbols “A” and
will light on the screen. While doing this, the oven will also start to operate.
4. At the completion of the set duration, the timer will stop the oven and give an audible warning.
Also, the symbol ”A” will begin to ash on the screen. After bringing the cooking function and oven
temperature knob to “0” position. Pressing any button less than 3 seconds, it will stop the audible
warning. Pressing the button for more than 3 seconds set the oven to Manual mode again to use
the oven.
Full-automatic programming
This function is used to cook after a certain period of time, with a certain duration. The food to
be cooked is put into the oven. The oven is adjusted to the desired cooking function. The oven
temperature is adjusted to the desired degree depending on the food to be cooked.
1. Press the button until you see “Dur“ on the timer screen. Use the Plus or Minus buttons to adjust
cooking period for the food you wish to cook . Press the button to conrm, the Time Of Day will
appear on the screen and the symbols “A“ will begin to continuously light on the screen.
2. Keep pressing the button until you see “End” on the timer screen. When you see “End” on the
timer screen, Use the Plus or Minus buttons to adjust nishing time, Press the button to conrm,
the Time Of Day will appear on the screen and the symbol “A” will begin to continuously light on the
screen. The symbol disappears until the time cooking starts.
You can set a time which can be up 23.59 hours after the time obtained by adding the cooking period to
the day’s time.
The oven will start operating at the time calculated by deducting the cooking period from the set
nishing time, and will stop at the set nishing time. The timer will give an audible warning and the
symbol “A” will begin to ash . After bringing the cooking function and oven temperature knob to ”0”
position. Pressing any button less than 3 seconds, it will stop the audible warning.
Pressing for more than 3 seconds set the oven to Manual mode again to use the oven.