User guide

USING PYROLYTIC CLEANING
USING PYROLYTIC CLEANING
17
10.004
START PYROLYTIC CLEANING
Select Pyrolytic function on your oven function control. The display should
show the default cleaning time of 2:00 hours. To start the cleaning process,
touch the
FUNCTION
OR
and the P symbol will ash for 5 seconds.
The door will lock within the pyrolytic cycle and the door lock indicator will
come on. This will stay on until the oven is at the nal stage of the cool down
process.
After the light goes out, the door can be opened. We suggest for you to leave
the oven to cool for another 30 minutes before cleaning away any ash. For the
best results, we suggest you clean the cavity, base and walls with a damp cloth.
ALTERNATIVE CLEANING CYCLES OR START TIMES
Whilst the and P are ashing, the pyrolytic cycle can be decreased to 1:00
hour by pressing or increased to 3:00 hours by pressing .
To set a start time - see section end of cooking time.
When the pyrolytic cycle is completed, you will hear an alarm and the P symbol
will ash. This will continue for 7 minutes or until you touch any of the touch
keys. The time of day will then be displayed.
CLEANING
MEDIUM DIRTLIGHT DIRT
HEAVY DIRT
DURATION 2 hours1 hour 3 hours
POWER FAILURE IN PYROLYTIC MODE
If the power fails, you will need to reset time of day. The child lock may need to
be deactivated before using the oven. See sections - set the clock and child lock.
To avoid an unwanted start of pyrolytic cleaning, the duration is set to
. The display shows and the symbol . The symbol P ashes until a
new oven mode is selected.
At the end of the pyrolytic cycle, the fan will continue to run for a period of time
to cool the product.
Auto Man P
min:sec
h:min
180
200
220
240
80
120
140
160
S