Users Guide Handbook Built In Pyrolytic Caution: Read the instructions before using the appliance WARRANTY REGISTRATION: CUSTOMER CARE HELPLINE: 0844 481 0182 0844 815 3746 (within the UK) WEBSITE: WWW.BELLING.CO.
CONTENTS & INTRODUCTION GETTING TO KNOW YOUR PRODUCT USING YOUR PRODUCT USING YOUR PROGRAMMER CLEANING INSTALLATION TECHNICAL CUSTOMER CARE Introduction Thank you for buying this British-built appliance from us. This user guide is designed to help you use and install your new cooker. Please read it carefully before you start using your product, as we have endeavored to answer as many questions as possible, and provide you with as much support as we can.
SAFETY • The manufacturer is not responsible if an incorrect installation and use, causes injuries and damage. • Make sure that you have removed all packaging and wrapping. Some of the items inside this appliance may have additional wrapping. • It is advised that you turn the ovens and/or grill on for a short while. This will burn off any residues left from manufacturing. There may be a smell which accompanies this process - but this is nothing to worry about and is harmless.
SAFETY • NEVER try to extinguish a fire with water, but switch off the appliance and then cover the flame with a lid or damp cloth. • Danger of fire: Do not store items on the cooking surfaces. • Servicing should be carried out only by authorised personnel. • Do not operate the appliance without the inner door glass correctly fitted. • Never put items directly on the base of the oven or cover the oven base with foil, as this can cause the base element to overheat.
SAFETY SAFETY CAUTION! • Do not spray aerosols in the vicinity of this appliance while it is in operation. • Do not store or use flammable liquids or items in the vicinity of this appliance. • Do not modify this appliance. • This appliance is for cooking purposes only. It must not be used for other purposes, for example room heating. • The top element gets extremely hot when in use, so take extra care to avoid touching it.
SAFETY - PYROLYTIC CLEANING Before carrying out a Pyrolytic self-cleaning function or the First Use function, please remove from the oven cavity: - Any excess food residues, oil or grease spills / deposits. - Any removable objects (including shelves, side rails and grill pans provided with the product) • Read carefully all the instructions for Pyrolytic cleaning. • Keep children away from the appliance while the Pyrolytic cleaning is in operation. The appliance becomes very hot.
GETTING TO KNOW YOUR OVEN Man P 80 S 240 220 FUNCTION 120 200 180 160 GETTING TO KNOW YOUR OVEN 1 h:min min:sec Auto 140 4 2 3 5 6 7 1. Control panel 2. Grill 3. Light 4. Door lock 5. Shelf runners 6. Oven fan 7. Inner door glass Oven Temperature Indicator h:min min:sec Auto Man P 80 S 240 FUNCTION Oven functions Timer & Programmer 220 120 200 180 200 140 Oven Temperature Control Door Lock Indicator 9.
GETTING TO KNOW YOUR OVEN GETTING TO KNOW YOUR OVEN (Function buttons dependant on model) FUNCTION (Function buttons dependant on model) Minute minder Pyrolytic cleaning mode Cooking time , , Volume level End of cooking time 7-segment display Time of day Max. adjustable minute minder Child lock Max. adjustable cooking time Cooking pot Display hours:minutes Automatic mode Display minutes:seconds Manual mode SET CLOCK - TIME After connecting the appliance for the first time: 1.
S 9.900 GETTING TO KNOW YOUR OVEN Recommended Uses Grill Ideal for anything from toast to steaks. Fanned Grill The fan allows heat to circulate around the food. Ideal for thinner foods such as bacon, fish and gammon steaks. Foods do not require turning. Use with the oven door closed Conventional Oven This function is ideal for traditional roasting. The meat is placed in the middle of the oven, roast potatoes towards the top.
USING YOUR OVEN As part of the cooking process, hot air is expelled through a vent in the oven. When opening the oven door, care should be taken to avoid any possible contact with potentially hot air, since this may cause discomfort to people with sensitive skin. We recommend that you hold the underneath of the oven door handle. PREHEATING Always use the fan oven setting for preheating to save time and electricity.
USING YOUR OVEN Make sure that frozen foods are thoroughly thawed before cooking. • Do not slow cook joints of meat or poultry weighing more than 2¼kg/4½lb. • Preheat the oven to 170°C and cook for 30 minutes, then adjust the oven control to S for the remainder of the cooking time. • Slow cooking times will be about 3 times as long as conventional cooking times.
USING YOUR OVEN The cooling fan The cooling fan may operate when the main oven is on and may continue to operate for a period after the oven has been switched off, to help cool the cavity down. To cool foods after cooking prior to refrigerating or freezing, turn the oven function control to the defrost position and open the door. Using Aluminium Foil Using aluminium foil to cover the grill pan, or putting items wrapped in foil under the grill creates a fire hazard. 9.
USING THE PROGRAMMER USING THE PROGRAMMER Symbols & functions: (Function buttons dependant on model) FUNCTION (Function buttons dependant on model) Minute minder Cooking time Pyrolytic cleaning mode , , Volume level End of cooking time 7-segment display Time of day Max. adjustable minute minder Child lock Max.
USING THE PROGRAMMER USING THE PROGRAMMER SELECT FUNCTION OR FUNCTION 1st TOUCH MINUTE MINDER 2nd TOUCH COOK TIME 3rd TOUCH END OF COOK 4th TOUCH TIME ADJUST 5th TOUCH VOLUME ADJUST MINUTE MINDER The minute minder can be set using the 99 minutes. or symbols up to a maximum of The display shows the symbol & the remaining time is displayed continuously. While setting other functions, the timer counts down in the background. The remaining time can be changed at any time by using the or bols.
USING THE PROGRAMMER The end of cooking time can be set using the or of cooking time is limited to the time of day plus Once set, the display changes to the time of day. symbols. The latest end . & the display shows the symbol and To change the time, repeat the steps above. To delete, set the time to . DELAYED COOKING (An automatic function to have food ready for a desired time of day) Set the oven function and temperature Set the desired cooking time - see section cooking time.
USING THE PROGRAMMER Activating the child lock in manual mode completely locks the appliance & the symbol is switched off. After de-activation, as described above, the symbol is displayed again. The child lock remains activated after a power failure. Before renewing the settings, the child lock has to be deactivated, as described above. 11.700 15 USING THE PROGRAMMER functions are selectable again.
USING PYROLYTIC CLEANING The glass in the door should always be kept clean. To remove stubborn dirt and stains, use absorbent kitchen roll or a damp sponge and an ordinary detergent. • If the oven is installed underneath a hob, make sure that the burners or electric plates/zones remain turned off during the automatic cleaning cycle. • Do not use abrasive or corrosive cleaners for cleaning the door glazing (e.g. powder products, stain removers and metal scouring pads).
USING PYROLYTIC CLEANING Select Pyrolytic function on your oven function control. The display should show the default cleaning time of 2:00 hours. To start the cleaning process, touch the and the P symbol will flash for 5 seconds. OR FUNCTION The door will lock within the pyrolytic cycle and the door lock indicator will come on. This will stay on until the oven is at the final stage of the cool down process.
CLEANING • It is important to clean the product regularly as a build up of fat can affect its performance or damage it and may invalidate your guarantee. • Always switch off your appliance and allow it to cool down before you clean any part of it. Do not use undiluted bleaches, products containing chlorides, wire wool or abrasive cleaners on aluminium, stainless steel, or plastic/painted parts as they can damage the appliance. Nylon pads can also be unsuitable.
CLEANING For your safety, glass door panels are made of toughened glass. This ensures that, in the unlikely event that a panel breaks, it does so into small fragments to minimise the risk of injury. Please take care when handling, using or cleaning all glass panels, as any damage to the surfaces or edges may result in the glass breaking without warning or apparent cause at a later date. Should any glass panel be damaged, we strongly recommend that it is replaced immediately.
Whilst every care is taken to eliminate burrs and raw edges from this product, please take care when handling - we recommend the use of protective gloves during installation. Please note that the weight of this appliance is approximately 41kg (unpacked). Take care when lifting it into the housing unit - always use an appropriate method of lifting. Remove the fixing screws included with the appliance, but leave the appliance in the base tray packaging until you are ready to install it.
5. WORK TOP WALL 5mm MIN CLEARANCE When installing the appliance below a work top, there must be a minimum ventilation area of 60cm2 below the appliance, either through the plinth or through the kick board, as indicated on the previous page. There must be a minimum 5mm gap between the front top edge of the oven and the underside of the work top. FRONT OF COOKER 5mm MIN CLEARANCE INSTALLATION 4.
INSTALLATION 2. Use a 13 amp fuse. 3. A type HO5 V V-F cable must be used as the mains lead. The cross section must be a minimum of 1.5mm². 4. The mains terminal block is sited on the right of the angled part of the service panel. 5. Follow the terminal block connection schematic. 6. Firstly open the terminal block cover by inserting a small flat bladed screwdriver into the door release tabs. 7. Remove the cable clamp screw to release the cable clamp. 8.
TECHNICAL TECHNICAL ELECTRIC PRODUCTS Electrical supply/load 220-240V ~ 50Hz 60cm: load = 2480W Countries of destination GB - Great Britain, IE - Ireland, WARNING! This appliance must be earthed. The Data badge is located at the bottom of the front frame, behind the door and rear of the product. 14.
23 Bn Bn Thermal Switch Thermal Switch T‘STAT 2 Bn W W Y Door Lock Neon V T’stat Bk Neon Bk Bn Bu V 11 14 12 Bn FAN TIMER PCB O/P L N PYRO T‘STAT 21 24 22 Y Tangential Cooling Fan I/P 1 32 31 I/P 2 I/P 3 W R Wiring colour code: Bk - Black, Bn - Brown, Bu - Blue, Gn - Green, Or - Orange, R - Red, W - White, Y - Yellow.
CUSTOMER CARE What parts of the appliance can be washed in a dishwasher? • Any enamelled parts such as the grillpan can be cleaned in a dishwasher, as can oven shelves and shelf guides. There’s been a power failure and the product won’t work. • Switch off the electricity supply. • When the power returns switch the electricity supply back on and re-set any programmer/clock to the correct time of day. My oven is a single combined oven and grill - can I use both functions together? • No.
CUSTOMER CARE CUSTOMER CARE Optional Extras A grill pan handle can be purchased as an optional extra from our Customer Care department quoting the part numbers below: HANDLE - 082283705 HANDLE GRIP - 082469100 COMPLETE GRILLPAN PACK - 012635666 CHANGING LIGHT BULBS Warning!: There is a risk of electric shock, so always make sure you have turned off and unplugged your appliance before starting. Always allow the product to cool down before you change a bulb.
CUSTOMER CARE To contact Belling about your appliance, please call Warranty Registration 0844 481 0182 to register your appliance Customer Care Helpline 0844 815 3746 in case of difficulty within the UK Alternatively general, spares and service information is available from our website at www.belling.co.uk Please ensure that you have the product’s model no and serial no available when you call.
