Baby Belling 121R Installation and User Instructions
Installing Your Cooker Your Belling Cooker Even if you have used an electric cooker before, it is important that you read these instructions thoroughly before starting to cook, paying particular attention to the installation and safety instructions. Getting help If you have any problems with installing, operating, or cooking with your Belling Cooker, please check through these instructions thoroughly to make sure that you have not missed anything.
Installing Your Cooker Connecting the cooker WARNING - THIS APPLIANCE MUST BE EARTHED The Baby Belling 121R is designed to operate from a 13A socket outlet. If the cooker is not already fitted with a plug proceed as follows: IMPORTANT: The cooker must be connected to the supply by a properly earthed 3-pin plug (minimum capacity 13 Amp). If a BS1363 fused plug is used it should be fitted with a 13 Amp fuse ASTA or BSI approved to BS1362.
For Your Own Safety When used properly your Baby Belling Cooker is completely safe, but as with any electrical appliance there are some precautions you must take in its use. Never ... • allow anyone except an authorised Belling Service Agent to service or repair your cooker. • remove any part of the cooker other than those intended in normal use, or attempt to modify the cooker in any way. • allow young children to operate or play with the cooker.
Controls Left hand boiling ring Grill switch Oven thermostat Right hand boiling Power ON neon Oven ON neon Power on This lights up to show that the cooker is switched on at the mains, even if it is not being used. Oven + selector To allow the Baby Belling 121 to operate from a 13 amp socket, the electrical load of the cooker is limited by the selector switch. The right hand hob element is switched off whenever the oven or grill are selected for use. 0 This is the ‘off ’ position.
Controls Oven/grill pan and grid To obtain the best results, always use the wire grid when grilling. This will ensure that foods do not cook in their own fats and will prevent any distortion of the grill pan. It can be used either way up to position the food nearer to or further away from the grill element. The grill pan is usually used in the middle position in the oven for grilling. To avoid burning or excessive smoking and spitting, make sure that the food is not too close to the grill element.
Care of your cooker In the interests of both safety and hygiene your Belling Cooker needs to be kept clean. A build-up of grease or fat from cooking could cause a fire hazard. WARNING! For your own safety, always switch off your cooker at the mains supply before cleaning. Never use excessive amounts of water to clean your cooker, and remember that your cooker is heavy - take care when pulling it out for access.
Care of your cooker Calling for Service Please consult your retailer in the first instance. If you experience difficulty contact, Belling Appliances Service Division. Remember that you may be charged for the visit (even during the guarantee period) if nothing is found to be wrong with your appliance, so always check to make sure that you have not missed anything.
