Installation guide

ELECTRONIC TIMER OPERATION
22
Cancelling an Automatic
Cooking programme.
You can cancel the Automatic Cook
Period at any time. You do not have
to let it finish.
To cancel :
l
Turn the oven controls to the off posi-
tion.
l
Press the Manual button to return the
ovens to Manual operation. The
‘AUTO’ symbol will go out.
Notes on timer operation:
l
When cooking automatically, the
Cook Period can be checked at any
time by pressing the Cook Period but-
ton.
l
When cooking automatically the
End Time can be checked at any time
by pressing the End Time button.
l
Having set a Cook Period and End
Time an electronic device stores the
information. The device within the
timer will switch the oven on and off at
the required times.
l
If a mistake is made while program-
ming, or you need to change the infor-
mation you’ve entered, you can clear
the programmer this way:
Press and release the Manual button.
S t a r t re entering the inform a t i o n
again.
Pressing Manual cancels all the
information previously entered.
l
If at any time the display shows
t h r ee zero ’s flashing (0.00) and
‘AUTO’, it is likely that the power sup-
ply has been interrupted. Reset the
timer to the correct time of day. If you
have been cooking, or set an Auto
Cook programme, it may not have
cooked, so please check that any food
is thoroughly heated before serving.
l
To set each function always press
and hold the required function button
and at the same time press the ‘+’ and
‘-’ buttons.
08 27095 00- 152A CC 14/6/04 11:00 am Page 24