Technical data

Installation Instructions

The back of the cooker has a slot for engagement of a

stability bracket, which can be obtained, as an extra, from the

cooker supplier. The leaflet included with the bracket should

be read in conjunction with the following instructions:

Push cooker to its intended position.

Draw pencil lines on the floor in line with the front and

left side of the plinth.

Remove the cooker.

Position stability bracket in accordance with diagram

below.

Measure height from floor level to the bottom of the

slot in the back of the cooker.

Add 3mm to the dimension and assemble the stability

bracket to that height. (i.e. from floor level to the

underside of the top member).

Stability

Bracket

PENCIL LINE

PLINTH

BRACKET

WALL

410mm