Technical data

19
Electronic Timer Operation
To Set The Minute Minder
Step 1
Ensure the time of day is set correctly.
Step 2
Press and release the “ ” Button.
Within 5 seconds press and hold the “ ” button
until the required time is set, a “Bell” symbol will
light up.
This can be adjusted by pressing the “ ” button.
The timer will then revert back to the time of day.
At the end of the set time a bleeping sound will
be heard and the “Bell” symbol will flash.
This can be cancelled by pressing the “ ” button.
NOTE: If necessary the Minute Minder can be cancelled before the tone sounds by
pressing the “ ” button and then pressing the “ ” button until 0.00 appears in the
display window.
Bell Symbol