Technical data

16
Electronic Timer Operation
TO SET TIME OF DAY
Step 1 Make sure all oven controls are turned off.
Step 2 Check the electricity supply to the cooker is turned
on.
Step 3 When switched on the display will show 0.00
and AUTO symbol will be flashing intermittently.
Step 4 Press and hold the “ ” Minute Minder & Cook Time
button together.
Step 5 With the “ ” Minute Minder & Cook Time buttons
still held in, press either the “ ” or “ ” buttons to
set the correct time of day.
Step 6 Release all the buttons simultaneously.
THE TIME OF DAY IS NOW SET.
To change the time of day repeat steps 4,5 & 6 above.
Note: You cannot adjust the time of day if the timer has
been set for an Auto Cooking Programme.
Step 4
Press and release the Cook Time button, the display will read
0.00 with the cookpot lit.
Within 2 seconds press and hold the “ ” button until the
required cooking period is set.
(Adjustment can be made by pressing the “ ” button).
The timer display will revert to the time of day with the Auto
symbol and Cookpot lit.
At the end of the cooking period the Auto symbol will Flash and
an intermittent bleeping sound will be heard.
– This will continue for approximately 2 minutes unless the
timer is reset within this period (See Step 6).
To Set Timer To Switch OFF Automatically
This allows you to cook immediately for a chosen period before the oven switches Off Automatically
Step 1 Ensure the time of day is set correctly.
Step 2 Place food onto the correct shelf position in the oven.
Step 3 Turn the oven control to the required temperature (Oven should now be operating).
The oven will now no longer operate until the timer has been reset. (See Steps 5 & 6 on next page)
Note: If at any time the display shows a ‘KEY’ symbol, it is likely that the timer has been set incorrectly.
OVEN COOKING IS NOT POSSIBLE. The ‘KEY’ symbol can be deleted and the cooker returned to manual
operation by:
- Simultaneously pressing the Minute Minder and the Cook Period buttons for a period of
approximately 8 seconds.
- Releasing the buttons and pressing the ‘+’ button.
A
U
T
O
A
U
T
O
A
U
T
O
Cookpot Symbol
Cookpot Symbol Disappears