GB Operators Manual US Operators Manual F Manuel De L'Opérateur E Manual del Operador P Manual de Operação NL Handleiding DK Betjeningsvejledning - Spare Parts Book - Pièces détachées - Libro Despiece - Lista de Peças - Onderdelen Boekje - Reservedele Skrift - Ersatzteilhandbuch - Manuale dei ricambi - Bruksanvisning - Bruksanvisning - Varaosaluettelo - Lista Części Zamiennych - Запасные части Книга - Varuosade nimekiri - Rezerves daļu saraksts - Atsarginiu daliu sarašas - Част Списък - Részek Oldalr
EC DECLARATION OF CONFORMITY / DECLARATION CE DE CONFORMITE / DECLARACIÓN DE CONFORMIDAD CE / DECLARAÇÃO CE DE CONFORMIDADE / EG-VERKLARING VAN OVEREENSTEMMING / EF OVERENSSTEMMELSESERKLÆRING We, Belle Group Sheen UK, Sheen, Nr.
Contents General .............................................................................................................................................................................. 16 Machine Plate.................................................................................................................................................................... 17 Technical data .........................................................................................................................
Machine Plate Fill in all data below, when delivering and commissioning the machine: Engine Model:............................................................... Engine Number: ............................................................ Technical Data SF 460 Contact area, (sq feet) 1.90 Vibration frequency (Hz) 90 Vibration frequency (vpm) 5400 Centrifugal force, (lbf) 4.05 Amplitude, (in) 0.04 Speed of travel, (feet/min) 82 Max.
Safety Instructions (For All Light Products) Symbols The signal words WARNING and CAUTION used in the safety instructions have the following meanings: CAUTION WARNING CAUTION Indicates danger or hazardous procedure that could result in damage to machine or property if the warning is ignored. WARNING Indicates danger or hazardous procedure that could result in serious or fatal personal injury if the warning is ignored.
Safety Instructions (For All Light Products) Filling with fuel (Gasoline/diesel) WARNING Petrol has an extremely low flashpoint and can be explosive in certain situations. Do not smoke. Make sure that worksite ventilation is good. Keep away from all hot or spark-generating objects when handling fuel. Wait until the machine has cooled before filling the tank. Fill the tank at least 3 metres away from where you intend to use the machine. Avoid spilling petrol, diesel or oil on the ground.
Safety When Driving Driving near an edge When driving near an edge, at least two thirds of the plate must be on firm solid ground. At least 2/3 Machine location when operating on edges Tilting Make sure that the work site is safe. Wet and loose earth reduces manoeuvrability especially on sloping ground. Always observe particular caution on sloping and uneven terrain. Max 20° or 36% WARNING Tipping angle on side slopes Where possible, avoid all driving across a slope.
Safety Decals, Location/Description 1. The operator must read the safety manual, and the operation and maintenance instructions before using the machine. 2. Warning - hot surfaces in the engine compartment. Do not touch. 3. Warning, hand and arm entanglement. Never reach into the hazardous area. 4. Petrol 5. Lifting point 6. Use ear protectors Pre-Start Checks Before start Follow the general safety precautions. Check that daily maintenance has been carried out.
Operation Robin Petrol Engine Stopping the engine 1. Set the Speed control lever to the low speed position and allow engine to idle for 2-3 minutes. 2. Turn the engine switch to the O position. 3. Close the fuel cock. Speed Control Lever Starting the engine 1. Turn the engine stop switch to the I position. 2. Open the fuel cock. 3. Set the Speed control lever 1/3 of the way towards the high speed position. Fuel Cock 4. Adjust the choke lever.
Service & Maintenance Maintenance Check the oil level in the engine (1) Every 10 Hrs / Daily First 50 Hrs Every 100 Hrs Every 200 Hrs Every 500 Hrs 9 Change engine oil (1) Fill fuel tank (2) 9 Check the engine cooling system (5) 9 Check the air filter on the engine (4) 9 9 9 Clean the air filter on the engine (4) 9 Change the air filter on the engine (4) Check for oil leaks in the machine 9 Check that all screw joints are tightened 9 Keep the machine clean 9 9 Check and clean the spar
Service & Maintenance Washing (high pressure) Keep the machine clean. Use only the frame lifting hook (1) to lift the machine. CAUTION Do not spray water directly on electric components or the instrument panel. Put a plastic bag over the filler cap of the fuel tank and secure with a rubber band. This will prevent water from entering the venting hole in the filler cap. This could otherwise cause operational disturbance, for example, a clogged filter.
Warranty Your new Belle Group SF460 is warranted to the original purchaser for a period of one-year (12 months) from the original date of purchase. The Belle Group warranty is against defects in design, materials an workmanship. The following are not covered under the Belle Group warranty: 1. Damage caused by abuse, misuse, dropping or other similar damage caused by or as a result of failure to follow assembly, operation or user maintenance instructions. 2.
SF460 22 21 23 24 27 8 29 28 7 6 5 10 9 11 12 4 13 15 3 16 2 14 17 18 1 15 19 20 16 1 46 42 45 44 41 40 39 43 38 37 36 35 34 33 32 216 25 26
SF460 ITEM (1) NUMBER PART (2) NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 164.3.003 164.0.016 164.0.023 164.0.026 164.0.024 164.0.021 164.0.022 164.0.020 164.0.036 164.0.025 164.0.039 164.0.034 164.0.035 164.0.030 164.0.012 164.0.026 164.0.032 164.0.017 164.0.019 164.0.018 164.0.055 07.3.101 10.7.225 164.0.056 164.0.057 07.3.101 06.8.001 164.0.029 29.1.129 21.0.149 21.0.140 164.0.001 164.0.013 164.0.015 164.0.
No.1 for Light Construction Equipment www.BelleGroup.com Belle Group Head Office Sheen, nr. Buxton Derbyshire. SK17 OEU GB. Tel: +44 (0)1298 84000 Fax: +44 (0)1298 84722 email: sales@belle-group.co.uk Belle Poland sp. z.o.o. 96-200 Rawa Mazowiecka Ul. Mszczonowska 36, Polska Tel: +48 (0) 46 8144091 Fax: +48 (0) 46 8144700 Belle Group France 70, av du Général de Gaulle 94022 Creteil, Cedex.
