Technical data

Service and Maintenance

The Belle Group Floor Saw is designed to give many years of trouble free operation. It is, however, important that the simple regular

maintenance listed in this section is carried out. It is recommended that an approved Belle Group dealer carries out all major

maintenance and repairs. Always use genuine Belle Group replacement parts, the use of spurious parts may void your warranty.

Before any maintenance is carried out on the machine ensure that the machine has been stopped.

• Always set the Floor Saw on level ground to ensure any ﬂ uid levels will be correctly read.

• Only use recommended oils.

Running In Period

When the Floor Saw is ﬁ rst used from new, the engine oil must be changed after the initial running in period (see engine manual

for full detail). The belt tension should be checked after 4 hours use.

Drive Belt.

Remove the belt guard then check the belt tension by placing light ﬁ nger pressure on the top of the belt, as near central between the

engine drive and arbor pulley. The belt should deﬂ ect by between 5mm and 10mm. If the belt tension requires adjustment, adjust the

engine’s position by turning the tension bolts clockwise to increase belt tension, anticlockwise to decrease. Once set, retighten the

engine mount bolts and check the belt tension a second time. Then check the pulley alignment. If the alignment is incorrect, loosen the

taperlock bushes and move the pulley to suit. Once the pulley is aligned, retighten the taperlock bushes. Finally, replace the belt guard

ensuring it is correctly and securely ﬁ tted.

Routine Maintenance After ﬁ rst First month 3 months 6 months

4 hours / 20h / 50h / 100h

Engine Oil Check Level 9

Change 9 9

Air Filter Check Condition 9 9

Clean / Replace 9

Spark Plug Check / Clean 9

Drive Belt Tension 9 9 9

Oil / Fuel Type & Quantity - Spark Plug Type

Oil type Quantity Fuel Type Capacity Spark Plug Electrode

(Litre) (Litre) Type Gap (mm)

Petrol Honda GX390 S.A.E. 10W 30 1.1 Unleaded 6.5 BM6ES or 0.6 - 0.7

BPR6ES

Petrol Robin EH41 S.A.E. 10W 30 1.2 Unleaded 7.0 BM6ES or 0.7 - 0.8

N9Y

Diesel Lombardini LD 440 Refer to Manual 1.5 Diesel Refer to N/A N/A

BS2869 Manual