For Models: B FL425
Preparation/Assembly 1 Make sure there is a Ø35-Ø40 Hole on the basin before fix the mixer, Unscrew the fitting ASSY from the bottom of the body, then get the body through the hole, don't forget to fix the o-ring between the bottom of the body and the basin. Ø35-Ø40Max 2 According the remove step to screw up the fixing set to the mixer below the basin. 3 Use hand to screw up the locknut, then use install tool for fixing strengthen.
Installation 5 Pull the handle top is open, the angle you pull are more, the flow rate is becoming large, conversely the angle youpull are small, the flow rate is becoming little till close. Installation/Pop-Up drain Flange 1 Remove flange from pop up main body. Leave black washer and nut on drain body. 2 Place a ring of putty around drain opening of sink.
Parts Breakdown Handle Trim cup Nut Cartridge Hex wrench Aerator Base Hose Fixing assembly Pop-up assembly Parts Diagram
