Installation Guide

6
Installation (continued)
7
Installing the spout assembly
□ Install the spout assembly (A) onto the
connector (F). Be sure the spout assembly (A)
is resting rmly on the deck.
□ Push down on spout assembly (A) and tighten
set screw (B) with the Hex wrench
(Hex: 2.38mm, C). Insert the index (D).
8
Installing the handle
□ Thread the connector (O) onto the cartridge
stem (1). Thread the ange (N) onto the ange (Q).
Place the handle (K) onto the connector (O). Place
the set screw (L) into handle (K) and tighten set
screw (L) with the Hex wrench (Hex: 2.5mm, M).
9
Making the water supply
connections
□ Connect the water supply lines (1) to the
faucet inlets (2). (Supply lines are not
included.)
C
D
A
B
F
L
M
K
N
O
1
Q
□ Place the other handle onto the left (hot) valve
and install the same way.
1
2