Instructions / Assembly

Post
Hanger
Door
Door Plate
Hanger
Door
Door Plate
7. Installing Door(s)
a) If using mortised type guide

bottom into bottom guide.
b) Insert door onto Hanger by
lifting the door and sliding
Door Plate onto post as shown.
c) Using the wrench provided
turn the post to adjust the
door vertically so it has

is level. Do not unscrew post
from Hanger.
d) When door is in position you
need to lock the door plate.
8. Install In-Track Stops
Loosen fastener to separate plates for installation. Insert into track as
shown. Tighten stop fastener once in desired location.
Optional Ordered Separately:
SL-BCG
• Install Bottom Channel Guide at bottom of Door with Adhesive. Door

3/8"
END VIEW
Recommended
Mortise
7/8"
Note: Do not leave door unattended until stops are
completely installed