User guide

© Bella Corporation 2013, All Rights Reserved Page 27
4 KillerKeys Pro iPad App
I. Getting Started
The KillerKeys Pro iPad App works in unison with the KillerKeys Pro desktop application for Windows to
give you control of your computer using a WiFi connection. The iPad App displays shortcuts within
Workspaces as shortcut buttons or on a virtual (VR) keyboard on the iPad, and includes a track pad,
customizable widgets, Quick Launch and Active App switching for complete control of your computer.
Connecting your iPad to KillerKeys
After installing the KillerKeys software and entering the licensing information on your computer, follow
these steps to connect your iPad to your computer.
1) The connection from the iPad to your computer uses WiFi: make sure the Wifi signal that you are
connecting to is on the same network as the computer you have installed the KillerKeys software.
2) You will need to know the IP of the computer that KillerKeys is installed on and enter it on the iPad.
You can find the IP from the KillerKeys desktop application by doing the following:
a) Find the KillerKeys Pro icon in the notifications area.
b) Right-click on the icon and select “Launch KillerKeys Pro Settings”.
c) Under Global Settings, click the radio button for Tablet Mode.
d) Select the Tablet tab, where you will find the IP for your computer.
e) Enter the IP on the iPad and press “Connect”.
f) Select “Save and Close” on the KillerKeys desktop application.
g) After the initial sync on the iPad, you should be good to go.
Important Note: Do not close the KillerKeys Pro iPad app during the Sync process. Do not switch to
another iPad app during the Sync process. If the (up to 10 minute) Sync process fails to execute properly,
you will need to uninstall and re-install the KillerKeys Pro iPad app.