Installation Guide

Care & Maintenance-

BellaCore Poly is manufactured from the finest impact-resistant PVC on the market. The Poly is a

durable, non-porous surface that is designed to provide years of and enjoyment.

With reasonable care and maintenance, under normal use, Bella CORE Poly System will retain its

beautiful finish with minimal care.

Simple Green All-Purpose Cleaner and Scrubbing Bubbles Bathroom Cleaner are recommended

Normal cleaning is easy by following these instructions:

 A mixture of warm water, mild liquid detergent or non-abrasive cleaner such as the Simple

Green or Scrubbing Bubbles, and a soft sponge is adequate for most cleaning.

 Dust and dirt may be removed with a soft, damp cloth or cheese cloth.

 Grease, oil, paint, or ink stains may be removed with Mineral Spirits.

 Never use abrasive cleaners, razor blades, or other sharp instruments that may scratch the

surface of your BellaCore products.

 Avoid exposing your BellaCore products to harsh chemicals such as acetone (nail polish

remover), nail polish, dry cleaning solution, paint removers and thinners, drain and bowl

cleaners, gasoline and pine oil. Strong detergents formulated for use on tile or porcelain enamel

surfaces should be avoided.

BellaCore products are designed to provide years of enjoyment. It is extremely durable but can be

damaged if abused, mistreated, or exposed to unapproved cleaners. To avoid this, please follow these

Care and Maintenance instructions carefully.