Manualshelf

Installation Guide

ManualsBrandsBella CORE ManualsBathroomWhite Poly Shower and Tub Surround with Beige Design Strip and Beige Trim and Accessories
11121314151617181920
16
Pic. 4.3
Other Design Strips (Stone)-
The first step is you must cut both the Tongue (male) & Groove (female) off of the panels and
make sure that the top of all the panels are at the same height & level.
Once you have the lower level of panels installed and level then you must cut some wood blocks
(spacers)that are the same height as your DS along with the grout line you want on both sides.
So if you have a 6” DS and want a 1/8” grout line on both sides then the wood spacers must be 6
¼”
Cut the Tongue & Grooves off of the top panels and install on top of the spacer blocks.