Installation Guide

25
Tub Decks-
When using the Bella Core Poly for a tub skirt then mitering the panels may be required for any angled
pieces (pic. 8.1).
Pic. 8.1
After cutting and mitering, dry fit the panels to make sure there is a tight fit. Then place a bead of the
color coordinating silicone between the joint as well as Bella CORE Fast Adhesive on the back. Now,
install both pieces together so that they can be pulled tight and then use tape to hold them
together until the adhesive sets up (pic. 8.2).
If using the Poly as a tub deck you will need to use the Full Bullnose Trims so that the tub deck panel can
be inserted into 1 channel and the tub skirt panel can be inserted into the other (pic. 8.3).
Pic. 8.2 Pic. 8.3