Manualshelf

Installation Guide

ManualsBrandsBella CORE ManualsBathroomBS Up to 48-inD48-inW48-inD Poly 3-Wall Shower and Tub Surround with Beige Katrina Strip and Beige Trim and Accessories
123
2
8. Place a bead of silicone along the edges of the Internal Corner trim base Part 1.
9. Clean the back of the panels prior to applying adhesive.
10. Using the Bella CORE Fast Adhesive, create a 2” circular dollop every 6”- 8”. Leave a 2” space
around the perimeter of the panel for adhesive spread.
11. Slide the back panel all the way into the left Internal Corner trim base channel and then work the
right side into the opposite Internal Corner trim channel. Push to wall and pat into place. When
interconnecting additional panels or Design Strips to other panels directly, place a bead of silicone
along the edge of the panel in the interconnecting channel. Using the Bella CORE Fast Adhesive,
create a 2” diameter circular dollop every 6”- 8”. Leave a 2” space around the perimeter of the
panel. apply fast adhesive to the back of the panel in fit into place, push to wall and pat into place.
Repeat with additional panels and Design Strips.
12. Brace panels against wall using spacer bars.
13. Corner Cap Installation: Make sure Corner Caps are clean and dry. Apply Bella CORE Fast Adhesive
to back of corner caps. Apply Belle CORE Industrial Silicone around the inside edge of the corner
cap area that will meet the panels. Position the Inside Corner Cap(s) above the Internal Corner
trim, push to wall and into place. Repeat with Outside Corner Caps positioning around the top
outside corner(s) of the Poly panel, push to wall and into place.
14. Half Bullnose Trim: Make sure Half Bullnose trim is clean and dry. If necessary, cut to size. Apply
Bella CORE Fast Adhesive to back of Half Bullnose Trim. Now apply Bella Industrial Silicone around
the inside edge of the trim that will meet the panels - set into place, push to wall to adhere.
15. Niche Self installation: Make sure niche is clean and dry. Apply Bella CORE Fast Adhesive to back
and around all edges - set into place.
16. Corner Shelf Installation: Make sure clear corner shelf brackets are clean and dry. Apply Bella
CORE Fast Adhesive to the back of the brackets. Using a corner level, ensure brackets are installed
level. Place brackets in position, set into place, press to wall. Tack bracket into place. (You may
use a staple gun or tack nail)
17. Leave overnight, with spacer bars in place, to allow adhesive to set and cur