Manualshelf

Installation Guide

ManualsBrandsBella CORE ManualsBathroomBaja Sand Baja Sand Panel Kit Shower Wall Surround (Common: 48-in x 48-in; Actual: 48-in x 48-in)
11121314151617181920
14
o Install panel and use the spacer bars to hold the panels tight until the silicone tacks up
(pic. 3.13), don’t over tighten.
Pic. 3.12 Pic. 3.13
Design Strips-
Installing Design Strips
Dry fit the Back Wall Design Strip (DS) to make sure the top of the DS aligns to the top of the line drawn
on the wall and to back corners. Apply silicone to the back of the Design Strip and into the groove
(female) of the panel (pic. 4.1). Install the tongue of Back Wall DS into the groove of panel
Pic. 4.1
Dry fit the Valve Wall Design Strip (DS) making sure the top of the DS aligns to the top of the line drawn
on the wall and to the lines drawn on the outside edges.
o Apply silicone to the back of the DS and groove of the back bottom panel
o Install the tongue of DS into the groove of panel (pic. 4.2)