User guide

3
Step 3: Connecting the power cord
• Connect the cable from the enclosed power supply adapter to the power
input (10-28VDC) on the back of the Turbo Hub.
• Connect the power cord to the power supply adapter and then insert the
plug into an outlet.
Note: The device will turn on automatically.
Step 4: Start-up
• Allow approximately one minute for the Turbo Hub to boot/start-up.
When the start-up procedure is finished, the Standby button will
show steady blue. The LED indicators on the front of the unit will show if
the Wireless LAN is activated and a connection to the Internet
has been made.
• The signal quality indicator shows the quality of
the signal from the Bell HSPA+ network. The more bars that are lit up, the
stronger the signal. The symbol “ ” in the centre of the graph is blinking
when searching for a network connection. When a high-speed connection
is established to the Bell HSPA+ network, the 3G with a plus (+) sign icon
is displayed.