User guide

5
Start-up
• Allow approximately one minute for the Turbo Hub to boot/start-up.
When the start-up procedure is finished, the following should occur:
1. The Power button
will show amber for a moment and then
turn to a steady green. A solid amber light indicates the unit has failed
to power-on.
2. When a high-speed connection is established to the Bell HSPA+
network, the 2G/3G indicator will be lit up in solid blue.
3. The Wi-Fi indicator will show solid blue.
4. The Internet Port indicator will show green.
5. The Signal Quality indicator shows the quality of the signal
from the Bell HSP+ network.
a. Solid blue: Excellent coverage
b. Solid green: Good coverage
c. Solid amber: Minimal coverage
d. Off: No coverage
If any of these conditions does not occur, refer to the Troubleshooting section
starting on page 7.