Specifications

System Components

Model 108Plus Control Unit

The Controller PCB is housed in a strong steel enclosure, with a hinged-lid

and a cam-lock to prevent unauthorised access. Security can be further

enhanced by placing the controller in a secured area. This arrangement

provides a superior level of security when compared to the many combined

keypad/controller units on the market, where access can usually be

attained by vandalism of the keypad; with a correctly installed 108plus

system this is impossible.

Model 216 Keypad

The Model 216 is a 12-key Stainless-Steel Keypad, offering a high level

of vandal resistance, and available with either an attractive alloy-cast

surface-mounting enclosure or a flush-fitting Zintec back-box. A red and

green LED indicator is provided for status indication; Green indicates door

open; Red indicates alarm condition and system lock-out.

Model 340 Power Supply Unit

The Model 340 Regulated Power Supply is the standard unit recommended

for use with the 108Plus Coded Access controller. Rated at 12VDC and

1Amp this power supply is sufficient to power a single 108Plus Controller

and two standard lock releases ( each 400mA).

Electric Lock releases

The 108Plus Controller has outputs for both Fail-secure and Fail-safe Lock

Releases. These will drive a wide range of devices including magnetic

locks.

CK109 Complete Coded Access System

The CK109 includes all of the components necessary for a single-door

Coded Access System in a single package:-

1 x Model 108Plus Coded Access Controller in a lockable steel cabinet.

1 x Model 216 Keypad,Stainless steel,Vandal-resistant, Surface-Mounted.

1 x Model 203 Lock Release type Fail-Secure, rated at 12V/400mA.

1 x Model 340 PSU, rated at 12VDC/1A

1 x Copy of the CK108Plus Installation Manual

For operation of a second door, an additional 216 keypad and Lock

Release is required.