User Manual

2
 Before inserting or removing a memory card, please turn off the power of the
camera first.
 After a memory card is used many times, its performance will be degraded. If
the memory card’s performance is degraded, a new memory card should be
purchased.
 Memory cards are precision electronic devices. Do not bend any memory
card, and avoid dropping it or subjecting it to stress.
 Do not place any memory card into a strong electric field or magnetic field
environment, e.g., near a speaker or TV receiver.
 Do not use or place any memory card in too hot or too cold an environment.
 Please keep any memory card clean and avoid it contacting any liquid. If the
memory card contacts liquid, wipe it dry with a piece of soft cloth.
 When a memory card is not in use, put it into a card case.
 Note that a memory card will become hot after being used for a long time.
This is fully normal.
 Do not use a memory card that has been used in another digital camera or
digital camera. If you want to use it in this digital camera, format it using this
camera first.
 Do not use a memory card that is formatted in another digital camera or
memory card reader.
 If one of the following occurs for a memory card, the recorded data may be
destroyed:
- Use the memory card improperly.
- Turn off the power or remove the memory card during recording, deleting
(formatting), or reading.
 It is recommended that important data be backed up onto other media, such
as a hard disk, CD-R, etc.
Maintenance and care of camera
When the camera is not in use, store it in a dry and dark place with the batteries
removed.
 Use a proper protective case to avoid scratching the lens and screen.
 To clean the lens surface, blow off the sand and dust on the surface first, and
then use a piece of cloth or paper towel suitable for cleaning optical devices
to lightly wipe the lens. If necessary, employ lens cleanser. Do not use
organic solvent to clean the camera.
 Do not touch the lens surface by your fingers.